Huge Savings Item! Save 17% on the Wheel Balancer 40mm X 4mm Shaft Manual Wing Nut by Generic at Pro Tech Tire & Auto Center. MPN: RSR2374. Hurry! Limited time offer. Offer valid only while supplies last. OEM Style Replacement Wing Nut for 40mm X 4mm Thread Pitch Shafts. Will fit all model balancers with 40mm X 4mm thread pitch shafts. To check, measure the diameter (40mm) and the thread spacing (4mm) on your balancer shaft. Thread spacing is the distance of one thread and one space; for example, the distance from the left edge of a thread to the left edge of the next thread. NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERINGWill fit all model balancers wi
Product Description & Reviews
OEM Style Replacement Wing Nut for 40mm X 4mm Thread Pitch Shafts. Will fit all model balancers with 40mm X 4mm thread pitch shafts. To check, measure the diameter (40mm) and the thread spacing (4mm) on your balancer shaft. Thread spacing is the distance of one thread and one space; for example, the distance from the left edge of a thread to the left edge of the next thread. NOTE: YOU MUST CHECK THE SHAFT THREAD PITCH TO SEE IF YOU HAVE A 3MM OR 4MM BEFORE ORDERING
Features & Highlights
- Will fit all model balancers with 40mm X 4mm thread pitch shafts
- Fits all of the following wheel balancer models with a 40mm X 4mm thread pitch shaft: Accuturn: 1200,1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650,1820 & 1850, Bosch: All Models, Cemb: All models with a 40mm diameter shaft, 1995 & later, Coats: All XR balancers
- FMC / John Bean: All Models with a 40mm shaft, Kwik Way: 402, 571, HS, 572, 574, 576, 578, Launch: 408, 500, SNAP-ON: All models with 40mm shaft
- MADE IN USA!
Additional Information
Category:
Wheel Alignment & Balancing Tools
Warranty:
Shop tools, equipment & parts are sold with a 1 year warranty against manufacturers defects. Plastic parts, turn-plate repair kits, bands, belts have a 90-day warranty.
Package Size:
8 x 5 x 11 inches
Have questions about this item (RSR2374), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Generic, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
sku: SPT99918, mpn: 99918, ean: 0082642999188,
Take the play out of front wheels during alignment. Place this spring-loaded pressure bar between the tires to assure a more accurate alignment. A must for Mercedes vehicles.Specialty Products Company (WA918) Wheel Spreader (SPC-99918).
mpn: 32115, ean: 0082642321156,
Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an ''off-center'' or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly ove...
mpn: 8252-28,
A great standard taper cone for passenger car wheels. Cone Size: 2.95'' to 3.63''. Fits 28mm Shaft Models: Accuturn: 5100, 5223, 5500, 5600 (Serial #51-0001 To 51-0622) Coats: 700, 800, 825, 850, 925, 950, 1000. 1025, 1050 And 1250 IBS2000 (Shaft Mus...